Peer-reviewed publications

	Van Treuren, K. W., and Eisenbarth, S., 2002, “Engineering Education in a Liberal Arts Environment at Baylor University,” presented at the ASEE National Conference, June 16-19, 2002, Montreal, Canada.
	Byerley, A. R., Stormer, O., Baughn, J. W., Simon, T. W., Van Treuren, K. W., and List, J., 2002, “Using Gurney Flaps to Control Laminar Separation on Linear Cascade Blades,” presented at the ASME Turbo Expo 2002, June 3-6, 2002, Amsterdam, Netherlands.
	Van Treuren, K. W., Eisenbarth, S., and Fry, C., 2002, “Developing Engineering Student Success – A Retention Study at Baylor University,” presented at the ASEE Gulf Southwestern Conference, March 20-22, 2002, Lafayette, LA.
	Van Treuren, K. W., Simon, T, von Koller, M., Byerley, A. R., Baughn, J. W., and Rivir, R., 2001, “Measurements in a Turbine Cascade Flow Under Ultra Low Reynolds Number Conditions,” Paper submitted for presentation at the ASME Turbo Expo 2001, June 4-7, 2001, New Orleans, LA. Accepted for publication in the ASME Journal of Turbomachinery.
	Van Treuren, K. W., and DeJong, N. C., 2001, “Using Design to Teach Thermodynamic Cycles:  Designing a 250 MW Steam Power Plant Using The Rankine Cycle,” Paper submitted for presentation at the ASME Turbo Expo 2001, June 4-7, 2001, New Orleans, LA.
	Van Treuren, K. W., and DeJong, N. C., 2001, “The Evolution of an Introductory Engineering Course Sequence:  Responding to Student, Faculty, and Industry Needs,” Paper presented at the ASEE Gulf Southwest Section 2001 Conference, March 28-30, 2001, College Station, TX.
	Van Treuren, K. W., and DeJong, N. C., 2000, “Assessment Tools in an Introductory Engineering Course.”  ASEE Gulf-Southwest Section Annual Conference, (searchable CD ROM), Las Cruces, NM.  April 6-8, 2000.
	Van Treuren, K. W., 2000, “Introductory Freshman Engineering in a Problem Based Learning Environment.”  ASEE Gulf-Southwest Section Annual Conference, (searchable CD ROM), Las Cruces, NM.  April 6-8, 2000.
	DeJong, N. C., Van Treuren, K. W., Farris, D., and Fry, C., 2000, “Using Design to Teach Freshman Engineering.” Paper presented at the 2000 ASEE Annual Conference, June 18-21, 2000 St Louis, MO.
	Butler, R. J., Byerley, A. R., Van Treuren, K. W., and Baughn, J. W., 2000, “The Effect of Turbulence Length Scale on Low Pressure Turbine Blade Heat Transfer.” Paper accepted for publication in the International Journal of Fluid Mechanics
	Van Treuren, K. W., and Haven, B., 2000, “Undergraduate Gas Turbine Engine Design Using Spreadsheets and Commercial Software,” ASME 2000-GT-587, Presented at the ASME IGTI Turbo Expo 2000, 8-11 May, 2000, Munich, Germany.
	Wagner, M, Forster, N. H., Van Treuren, K. W., and Gerardi, D. T., 2000, “Vapor Phase Lubrication in a Cold Engine Bearing,” ASME Journal of Engineering for Gas Turbines and Power, Vol 122, No 2, pp 185-190.
	Wagner, M, Forster, N. H., Van Treuren, K. W., and Gerardi, D. T., 1999, “Vapor Phase Lubrication in a Cold Engine Bearing,” ASME 99-GT-28.
	Van Treuren, K. W., Barlow, D. N., Heiser, W. H., and Wagner, M, 1998, “Investigation of Vapor Phase Lubrication in a Gas Turbine Engine,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 20, pp. 257-262.
	Welsh, S., Barlow, D. N., Byerley, A., Baughn, J., Butler R., Van Treuren, K. W., and Rivir. R., 1997, “Influence of Turbulence Intensity on Local Heat Transfer Coefficients in a Turbine Cascade,” ASME 97-GT-131.
	Van Treuren, K. W., Barlow, D. N.,  Heiser, W.H., and Wagner, M, 1997, “Investigation of Vapor-Phase Lubrication in a Gas Turbine Engine,” ASME 97-GT-3
	Van Treuren, K. W., Wang, Z., Ireland, P. T., Jones, T. V., and Kohler, S. T., 1996, “Comparison and Prediction of Local and Average Heat Transfer Coefficients Under an Array of Inline and Staggered Impinging Jets,” ASME 96-GT-163.
	Van Treuren, K. W., Wang, Z., Ireland, P. T., Jones, T. V., and Kohler, S. T., 1996, “The Role of the Impingement Plate in Array Heat Transfer,” ASME 96-GT-162.
	Van Treuren, K. W., Wang, Z., Ireland, P. T., and Jones, T. V., 1994, “Detailed Measurements of Local Heat Transfer Coefficient and Adiabatic Wall Temperature Beneath an Array of Impinging Jets,” ASME Journal of Turbomachinery, Vol. 116, pp. 368-374.
	Van Treuren, K. W., Wang, Z., Ireland, P. T., Jones, T. V., and Kohler, S. T., 1994, “Local Heat Transfer Coefficient and Adiabatic Wall Temperature Measurements Beneath Arrays of Staggered and Inline Impinging Jets,” ASME 94-GT-181.
	Van Treuren, K. W., Wang, Z., Ireland, P. T., and Jones, T. V., 1993, “Detailed Measurements of Local Heat Transfer Coefficient and Adiabatic Wall Temperate Beneath an Array of Impinging Jets,” ASME 93-GT-205.